Panasonic Minas E Series - Description on Dividing;Multiplier Ratio

178
Pulse row position
command
Distance: P1 [P]
Traveling speed: F [PPS]
Command dividing multiplier ratio
Servo driver
D =
Pr46 x 2
Pr4B
Pr4A
Servo
motor
Encoder
Gear
Machine
Rotation speed: N [r/min]
Reduction ratio: R
Number of encoder pulses E [P/r]
10000 = (phase A/B 2500 [P/r] x 4)
Example of driving ball screw using the servo motor
Description on Dividing/Multiplier Ratio
Relation between Positional Resolution/Moving Speed and Command Dividing Multiplier Ratio
As an example of a machine, we describe a ball screw driving system below:
When lead of a ball screw is L [mm], actual distance of a ball screw M [mm] with respect to the distance command
PI [P] is expressed with formula (1) below:
M = P1 x (D/E) x (1/R) x L................................. (1)
Therefore, position resolution (distance DM per command pulse) is expressed by the following formula (2):
∆∆
∆∆
∆M = (D/E) x (1/R) x L....................................... (2)
Through transformation of formula (2), a command dividing multiplier ratio D is determined by the formula (3):
D = (
∆∆
∆∆
∆M x E x R)/L ............................................ (3)
In addition, actual traveling speed V [mm/s] of a ball screw with respect to traveling speed command F [PPS] is
expressed by formula (4), and the corresponding motor rotation speed N is determined by formula (5):
V = F x (D/E) x (1/R) x L ................................... (4)
N = F x (D/E) x 60 ............................................. (5)
Through transformation of formula (5), a command dividing multiplier ratio D is determined by the formula (6):
D = (N x E)/(F x 60) ........................................... (6)
<Remarks>
1. Set the positional resolution (∆M) at approx. 1/5 to 1/10 of the positioning accuracy (∆ ε ), in view of mechanical
errors.
2. Set a value from 1 to 10000 to Pr46 and Pr4B.
3. You can set any value depending on numerator and denominator settings. However, if you specify an extreme
dividing/multiplier ratio, we cannot guarantee proper operation of the motor. We recommend that you set the
dividing/multiplier ratio in the range of 1/50 to 20 times.
4.
2
n
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
2
10
2
11
2
12
2
13
2
14
2
15
2
16
2
17
Decimal
1
2
4
8
16
32
64
128
256
512
1024
2048
4096
8192
16384
32768
65536
131072
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com