199
[Reference]
Check the Combination of Driver and Motor with Gear
This driver was designed for use with the motor designated by us.
Check a name of the series, rated output, voltage specification, and encoder specification of the motor you plan to
use.
Incremental Specification 2500 P/r
<Note>
You must not use any combination other than those listed below.
MUMA011P * 1N
MUMA021P * 1N
MUMA012P * 1N
MUMA022P * 1N
MUMA042P * 1N
MUMA012P * 1N
MUMA022P * 1N
MUMA042P * 1N
MUMA011P * 2N
MUMA021P * 2N
MUMA012P * 2N
MUMA022P * 2N
MUMA042P * 2N
MUMA012P * 2N
MUMA022P * 2N
MUMA042P * 2N
MUMA011P * 4N
MUMA021P * 4N
MUMA012P * 4N
MUMA022P * 4N
MUMA042P * 4N
MUMA012P * 4N
MUMA022P * 4N
MUMA042P * 4N
Single Phase
100V
Single Phase
200V
Three-Phase
200V
The mark "*" under the model name of the a
licable motors refer to the structure of motor.
MKDET1110P
MLDET2110P
MKDET1505P
MLDET2210P
MLDET2510P
MKDET1505P
MKDET1310P
MLDET2310P
MLDET2510P
Frame K
Frame L
Frame K
Frame L
Frame K
Frame L
Power Supply
Motor Rated Output
Driver Model
Driver Frame
100W
200W
100W
200W
400W
100W
200W
400W
Reduction Ratio 1/5 Reduction Ratio 1/9 Reduction Ratio 1/25
Applicable Motors with Gear Applicable Drivers
<Remarks>
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
