Panasonic PT-EX620

Chapter 7 Appendix — Precautions for Attaching Ceiling Mount Bracket
162 - ENGLISH
Precautions for Attaching Ceiling Mount Bracket
f
When installing the projector to a ceiling, be sure to use the specied optional Ceiling Mount Bracket as the following
combinations:

ET-PKD120H (for High Ceilings) and ET-PKE300B (Projector Mount Bracket)

ET-PKD120S (for Low Ceilings) and ET-PKE300B (Projector Mount Bracket)
Other combination is not available.
f
When installing the projector, attach the drop-prevention wire supplied with the Projector Mount Bracket.
f
Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f
Panasonic takes no responsibility for any accident, damage, damages to the projector resulting from use of a ceiling mount
bracket not manufactured by Panasonic, optional Ceiling Mount Bracket combinations not specied , installation method not
described in installation manual, optional accessories not specied or the inappropriate choice of location for installation,
even if the warranty period of the projector has not expired.
f
Unused products must be removed promptly by a qualied technician.
f
Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use electric
screwdrivers or impact screwdrivers.
f
Read the Installation Instructions for the Ceiling Mount Bracket for details.
f
The model numbers of accessories and optional accessories are subject to change without prior notice.

M4
M4
M4
M4
M4
M6
M6
M6
M6
M6
M6
Bottom view
Model No. of Ceiling Mount Bracket:

ET-PKD120H (for High Ceilings)
ET-PKE300B (Projector Mount Bracket)

ET-PKD120S (for Low Ceilings)
ET-PKE300B (Projector Mount Bracket)
Torque: (M6) 4 ± 0.5 N·m
12 mm (15/32")
Note
f
You can also use the existing ceiling mount bracket ET-PKF110H (for High Ceilings) or ET-PKF110S (for Low Ceilings).
Model No. of Ceiling Mount Bracket (Supplement):

ET-PKF110H (for High Ceilings)

ET-PKF110S (for Low Ceilings)

M4
M4
M4
M4
M4
M6
M6
M6
M6
M6
M4
Bottom view
Model No. of Ceiling Mount Bracket:

ET-PKF110H (for High Ceilings)

ET-PKF110S (for Low Ceilings)
Torque: (M4) 1.25 ± 0.2 N·m
8 mm ( 5/16")