Panasonic PT-EX620

Chapter 3 Basic Operations — Projecting
ENGLISH - 53
f
Only [FOCUS] is shown in yellow so that the displayed menu item can be recognized by color, even when the projector is not focused and
displayed characters are unreadable. (Factory default)
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the <DEFAULT> button on the remote
control.
f
The [HOME POSITION] screen is displayed.
2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the <ENTER>
button.
f
[Return to HOME POSITION.] is displayed during in progress, and the lens returns to the home position.
Note
f
You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.
Adjustment range by the lens position shift (optical axis shift)
The projection position can be adjusted in the range shown in the following gure with the optical axis shift
function based on the position of the projected screen in the home position (standard projection position).
PT-EZ590 / PT-EW650 / PT-EW550 PT-EX620 / PT-EX520
0.3 H0.3 H
Standard projec-
tion position
Image
height V
Image width H
0.6 V0.6 V
0.3 H0.3 H
Standard pro-
jection position
Image
height V
Image width H
0.5 V
0.5 V