Panasonic PT-EX620

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 99
f
The sub items will switch each time you press the button.
[RGB1] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[RGB2] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[VIDEO] Select one item among [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI1] Select one item among [HDMI1 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[HDMI2] Select one item among [HDMI2 AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[DIGITAL LINK]
*1
Select one item among [DIGITAL LINK AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
[NETWORK] Select one item among [NETWORK AUDIO IN], [AUDIO IN 1], [AUDIO IN 2] or [AUDIO IN 3].
*1 Only for PT-EZ590, PT-EW650 and PT-EX620
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input
signal before performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f
The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
3) Press qw to switch the test pattern.
f
The test pattern will switch each time you press the button.
f
When you press the <MENU> button or the <RETURN> button, it will exit the test pattern and return to the
sub menu of [PROJECTOR SETUP].
All white
Select a test pattern so that it is easy to make various adjustments.
Color bars (vertical)
Color bars (horizontal)
16 gradations (vertical 1)
16 gradations (vertical 2)
16 gradations (horizontal 1)
16 gradations (horizontal 2)
White cross on the black
background
Black cross on the white
background
Cross hatch
Note
f
The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the <FUNCTION> button.
f
Press the <ON SCREEN> button on the remote control while the test pattern is displayed to hide the menu screen.
[FILTER COUNTER]
You can check the lter usage time and set the cleaning cycle for the air lter. Also, reset the lter usage time.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER] Displays the using time of the lter.
[TIMER] Sets the cleaning cycle (time) for the air lter.
[FILTER COUNTER RESET] Resets the lter usage time.
Setting [TIMER]
Sets the cleaning cycle (time) if you want to clean the air lter periodically. When the time reaches, an alert
message “FILTER COUNTER has reached the set time.” for lter cleaning is displayed on the projected screen.