Panasonic PT-EX620 - [Audio Setting]; [Off]

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
Releasing assigned function to the <FUNCTION> button
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f
The [FUNCTION BUTTON] screen is displayed.
3) Press the <ENTER> button.
4) When the confirmation screen is displayed, press qw to select [OK] and press the <ENTER> button.
Note
f
You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, submenu,
or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.
[AUDIO SETTING]
You can perform more detailed setting for Audio.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation Adjustment Range
Press the w button.
Increases the volume.
0 ~ 63
Press the q button.
Decreases the volume.
Adjusting the left to right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Increases the volume on the right.
L16 ~ R16
Press the q button.
Increases the volume on the left.
Setting audio output of the built-in speaker
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press as to select [BUILT-IN SP].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[ON] Audio is output from the built-in speaker.
[OFF] Audio is not output from the built-in speaker.