Panasonic PT-EX620 - Switching the Aspect Ratio of the Image; Using the Digital Zoom Function

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 57
Switching the aspect ratio of the image
You can switch aspect ratios according to the input signal.
button
1) Press the <ASPECT> button.
f
The setting will change each time you press the button.
Note
f
Refer to the [POSITION] menu
→
[ASPECT] (
x
page 78) for details.
Using the digital zoom function
(Only for still image-based RGB signals/still image-based HDMI signals/still image-based DIGITAL LINK signals
input)
You can enlarge images. You can also change the location of the images to be enlarged.
buttons
1) Press the <D.ZOOM -> button/<D.ZOOM +> button.
f
The moving screen is displayed when executing the remote control operation, and the [DIGITAL ZOOM]
individual adjustment screen is not displayed.
f
The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For
details, refer to [DISPLAY OPTION] → [OTHER FUNCTIONS]. (
x
page 90)
2) Press the following buttons to move the location of the image or adjust the magnification.
f
The digital zoom function is canceled if the <D.ZOOM -> button/<D.ZOOM +> is pressed for three seconds
or more.
Operation menu/Buttons Operation Adjustment
Moving screen
Remote control operation button
Press the a button.
Moves the image to the bottom.
Press the s button.
Moves the image to the top.
Press the q button.
Moves the image to the right.
Press the w button.
Moves the image to the left.
Press the <MENU> button. Moves the image to the upper left.
Press the <RETURN> button. Moves the image to the upper right.
Press the <ENTER> button. Moves the image to the center.
Press the <DEFAULT> button. Moves the image to the lower left.
Press the <FUNCTION> button. Moves the image to the lower right.
Press the <D.ZOOM +> button. Increases magnication.
Press the <D.ZOOM -> button. Decreases magnication.
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
a
button
w
button
▼ button
q
button
<MENU> button <RETURN> button
<FUNCTION> button
<DEFAULT> button
<ENTER> button
Fig. 1 Screen display position after the button operation