Chapter 4
Settings — [POSITION] menu
76 - ENGLISH
5) Press as to select the item to adjust, then press the <ENTER> button.
f
The [CORNER CORRECTION] individual adjustment screen is displayed.
6) Press asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT]
Setting
[CURVED CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f
The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [CURVED CORRECTION].
4) Press the <ENTER> button.
f
The [CURVED CORRECTION] screen is displayed.
5) Press as to select one item to adjust.
[KEYSTONE] Adjusts when the trapezoid of the projected image is distorted.
[ARC] Adjusts when the radian of the projected image is distorted.
6) Press the <ENTER> button.
f
The [KEYSTONE] or the [ARC] individual adjustment screen is displayed.
Adjusting [KEYSTONE]
1) Press asqw to adjust.
f
For details, please refer to [KEYSTONE] in [SCREEN ADJUSTMENT] menu. (
Æ
page 75)
Adjusting [ARC]
1) Press asqw to adjust.
Items Operation Adjustment
[H]
Press the q button.
The top and the bottom of horizontal line will
be bulge.
Press the w button.
The top and the bottom of horizontal line will
be dent.
[V]
Press the a button.
The left and the right of vertical line will be
dent.
Press the s button.
The left and the right of vertical line will be
bulge.
Note
f
One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE], [CORNER
CORRECTION] or [CURVED CORRECTION] adjustment is nished, you adjust the others, the adjusted value will be reset.
f
Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED CORRECTION]
screen is displaying, it will switch to the next adjustment screen.
To Next Page
Loading...
