10
4 Specifications
Q Amplifier Section
RMS Output Power Stereo Mode
Front Ch (both ch driven) 20 W per channel (6 Ω), 1 kHz, 10
% THD
Phone jack
Terminal Stereo, 3.5 mm jack
Output level (CD, 1 kHz, -20 dB) max. 1.18 mW +1.18 mW, 32 Ω
Aux (Rear)
Sensitivity
Normal level 630 mV, 12.4 kΩ
High level 630 mV, 12.4 kΩ
Terminal Stereo, 3.5 mm jack
Q Tuner Section
Preset memory FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range 87.9 MHz to 107.9 MHz
(200 kHz step)
87.5 MHz to 108.0 MHz
(100 kHz step)
Antenna terminals 75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range 520 kHz to 1710 kHz
(10 kHz step)
Q Disc Section
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
* MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up (CD)
Wavelength 795 nm
Laser power CLASS 1
Audio output (Disc)
Number of channels FL, FR, 2 channel
Audio performance (CD-Audio)
Frequency response 4 Hz to 20 kHz
S/N ratio 95 dB
Dynamic range 93 dB
Total harmonic distortion 0.005 %
Q Speaker Section
Type 1 way, 1 speaker system (Bass
reflex)
Speaker unit(s)
Full range 6.5 cm Cone type
Impedance 6 Ω
Input power (IEC) 30 W (Max)
Output sound pressure 79 dB/W (1.0m)
Frequency range 55 Hz to 25 kHz (-16 dB)
90 Hz to 22 kHz (-10 dB)
Q General
Power supply AC 120 V, 60 Hz
Power consumption 28 W
Dimensions (W x H x D) 500 mm x 195 mm x 102.5 mm
(19 11/16" x 7 11/16" x 4 1/16")
[D = 69 mm (2 3/4") minimum]
Mass Approx. 3 kg (6.6 lbs)
Operating temperature range 0°C to +35°C (+32 °F to +95 °F)
Operating humidity range 35% to 80 % RH (no condensa-
tion)
Power consumption in standby mode 0.2 W (approx)
Notes :
1. Specifications are subject to change without notices. Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
To Next Page
Loading...
Need help?
General
