Panasonic SC-TM72DV - Page 32

Measurement of CD
laser current
electricity
Whil
e the player is
stopped and no disc
is inserted, press
and hold down the
button on the
player and the
nu
mber button “3”
on
the remote
controller unit.
Mea
surement of CD laser current electricity
Mea
sures CD laser current electricity and
di
splays the result together with the
initialization value stored in EEPROM. After
measurement, CD laser is lit tillthe power is
tu
rned off (or goes off when the primary
power is turned off).
LDC*1 _032*2 _032*3
*1
: CD laser current electricity
measurement mode
*2
: Current electricity
ini
tializationvalue stored in
EEPROM
*3
: Present value of current
electricity
Values are shown in the decimal
di
git. The above example indicates
the current electricity initialization
value is 28mA and its presentvalue
is
26mA when laser is turned on.
Auto
matically
exits the mode
after five
seconds.
User initialization While the player is
stopped and no disc
is inserted, press
and hold down the
button on the
Us
er initialization
The user setting recovers the factory setting.
“INITIALIZE” -
player and the
nu
mber button
on the
remote controller
un
it.
Region display While the player is
stopped and no disc
is inserted, press
and hold down the
button on the
player and the
nu
mber button, “6”
onthe remote
controller unit.
Region display [srrrxxyzzzz]
s : Panecon model type
rrr
: Panecon release number
x : Syscon generation (45)
y: Syscon model type
zzz
: Syscon release number
Auto
matically
exits the mode
after five
seconds.
Firmware version
di
splay
Whil
e the player is
stopped and no disc
is inserted, press
and hold down the
button on the
player and the
nu
mber button, “7”
on
theremote
controller unit.
Firmware version display rrr*1 _xx*2 y*3 zzz*4
*1
: Panel computer release
number
*2
: System computer generation
*3
: Systemcomputer model type
*4
: System computer release
number
Auto
matically
exits the mode
after five
seconds.
Region and
firmware display
Whil
e the player is
stopped and no disc
is inserted, press
and hold down the
button on the
player and the
nu
mber button, “8”
on
theremote
controller unit.
Re
gion and firmware version display _r*1 __xx*2 y*3 zzz*4
*1
: Region number
*2
: System computer generation
*3
: Systemcomputer model type
*4 : System computer release
nu
mber
Auto
matically
exits the mode
after five
seconds.
Laser use time While the player is
stopped and no disc
is inserted, press
and hold down the
button on the
player and the
button on the
remote controller
un
it.
La
ser usage time
Measures each for DVD and CD respectively.
T1_1234_5678
The numbers in the left show usage
ti
me for DVD laser and those in
the right for CD laser. The four-
di
git number is shown by the ten
hours in the decimal digit. The
nu
mber after 0000 is 9999.
Auto
matically
exits the mode
after five
seconds.