Pantum CM1100DW Series User Manual

139
Repetitive
defects
• The toner cartridge is damaged.
The print quality test page does
not meet any of the following
measurements:
Cartridge:
• 25.70mm
• 35.30mm
• 75.6mm
• 26.7mm
Fuser:
• 56.5mm
Transfer module:
• 25.10mm
• 59.70mm
• 28.30mm
• 65mm
• 65mm
• It is recommended to replace with the
original toner cartridge.
• Please record the data and contact the
customer service center.
Note:
• The faults above can be mitigated by cleaning or replacing the cartridge. If the problem
persists, please contact the customer service center. See the Three Guarantees
certificate for contact details.
Horizontal
white lines
• Toner cartridge is not installed
properly.
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner
cartridge, and insert the toner cartridge tray.
Vertical white
lines
• The print media does not meet the
usage specification. For example,
the print media is textured, damp, or
too rough.
• Toner cartridge is not installed
properly.
• Please correctly use the medium
conforming to the specifications. See
Section 2.
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner
cartridge, and insert the toner cartridge tray.

Pantum CM1100DW Series Specifications

General

Brand	Pantum
Model	CM1100DW Series
Category	Printer
Language	English