LCD Keypad 19
10 .2 DEL A YE D FIRE ZON E
If you are unable to cancel th e false alarm, you r system will send an al ert. Cal l your Central
Mo nitoring Station to advise them of the fa lse a larm.
The Fire Zone may rese t itself once the smoke has cleared. If it does not, simultaneously
press and hold the [
CLEAR ] and [ENTER] buttons for two seconds or speak to your installer.
Figure 10.1: Delayed Fire Zone
10.3 FIRE SAFETY TIPS
How shou ld yo u prepa re in case o f a fire in your home or b usiness?
• Remind everyone to escape first, and then call for help.
• Develop a fire escape plan and designate a meeting place outside.
• Practice the escape plan frequently.
• Plan two ways to escape from every room, if possible.
• Practice feeling the way out with eyes closed.
• Instruct everyone
never
to stand up during a fire, always crawl under the smoke and keep mouths covered.
• Instruct everyone
never
to return to a burning building for any reason; it may cost them their life.
• Check smoke alarms regularly. Working smoke alarms dramatically increase everyone's chances of surviving a fire.
If the zone is a Delayed Fire
Zone, there is an automa tic
delay before your system
contacts your Central
Mo nitoring Station. Refer to
Fig ure 1 0.1 on p age 19 to
prevent u nnecessary
reporting of false alarms.
What do I do if the fire alarm is accidentally triggered?
1) Press the [CLEAR] bu tton within 30 second s of the alarm.
2) Clea r the prob lem from the area (i.e. clear the smoke fro m arou nd the smoke
detector).
3) If the problem rema ins after 90 seconds, the alarm will sound again. Press
[
CLEAR] ag ain.
The system wi ll delay reporting the aler t fo r anothe r 30 seconds.
To Next Page
Loading...
