Pax Technology Aries8 - Integrated Plate Stylus Holder Installation

ARIES8 REFERENCE GUIDE
v2.1 | 25
9 .2.3.1 Integrated Plate Stylus Holder Installation
1. With the pen holder oriented toward the front of the plate, align the screw holes on the stylus
holder with the screw holes located at the top of the Integrated Plate.
2. Using the included screws (2pcs) and a Phillips-Head screwdriver, hand-tighten the Stylus
Holder until it sits firmly at the top of the Integrated Plate.