ARIES8 REFERENCE GUIDE
v2.1 | 29
9 .3.5 MOUNTING PLATE STYLUS PEN HOLDER
If included, an optional stylus pen holder is attached to the top of the Mounting Plate.
Please Note: A stylus pen is included if the plate is purchased separately. A stylus pen is not included with
the Aries8 Kits, but may be purchased separately.
9 .3.5.1 Mounting Plate Stylus Pen Holder Installation
1. Insert the pen holder into the gap at the back top of the plate.
2. Push the pen holder to the end to secure it into place.
Optional Stylus Pen Holder
To Next Page
Loading...
