Penguin Computing Relion 1900e - Page 169

Relion 1900e/2900e Manual
Revision 1.3 154
Feature
Description
On-board storage
controllers and options
• 10 x SATA 6Gbps ports (6Gb/s, 3 Gb/s and 1.5Gb/s transfer rates are supported)
• Two single port SATA connectors capable of supporting up to 6 Gb/sec
• Two 4-port mini-SAS HD (SFF-8643) connectors capable of supporting up to 6 Gb/sec /SATA
• One eUSB 2x5 pin connector to support 2mm low-profile eUSB solid state devices
• Optional SAS IOC/ROC support via on-board Intel® Integrated RAID module connector
• Embedded Software SATA RAID
o Intel
®
Rapid Storage RAID Technology (RSTe) 4.0
o
Intel
®
Embedded Server RAID Technology 2 (ESRT2) with optional RAID 5 key support
Security
• Intel
®
Trusted Platform Module (TPM) - AXXTPME5 (v1.2), AXXTPME6 (v2.0) and AXXTPME7 (v2.0)
(Accessory Option)
Server Management
• Integrated Baseboard Management Controller, IPMI 2.0 compliant
• Support for Intel
®
Server Management Software
• On-board RJ45 management port
• Advanced Server Management via an Intel
®
Remote Management Module 4 Lite (Accessory Option)
Power Supply Options
The server system can have up to two power supply modules installed, providing support for the
following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power
Three power supply options:
• AC 750W Platinum
• DC 750W Gold
• AC 1100W Platinum
Storage Options
12Gb/sec Hot Swap Backplane Options:
• 8 x 2.5” SATA/SAS
• 8 x 2.5” Combo Backplane - SATA/SAS + up to 4 x PCIe NVM Express* (Not Hot Swappable)
• 8 x 2.5” Dual Port SATA/SAS
• 8 x 3.5” SATA/SAS
• 12 x 3.5” SATA/SAS
12 Gb/sec 24 port SAS Expander Support (Accessory Options)
• Internal mount
• PCIe* add-in
Storage Bay Options:
• 8 x 3.5” SATA/SAS Hot Swap Drive Bays + Optical Drive support + front panel I/O
• 12 x 3.5” SATA/SAS Hot Swap Drive Bays (Storage model)
• 8 x 2.5” SATA/SAS Hot Swap Drive Bays + Optical Drive support + front panel I/O
• 16 x 2.5” SATA/SAS Hot Swap Drive Bays + Optical Drive support + front panel I/O
• 24 x 2.5” SATA/SAS Hot Swap Drive Bays (Storage model)
• 2 x 2.5” SATA SSD Back of Chassis Hot Swap Drive Bays (Accessory Option)
• 2 x internal fixed mount 2.5” SSDs ( All SKUs)
Supported Rack Mount
Kit Accessory Options
• AXXPRAIL – Tool-less rack mount rail kit – 800mm max travel length
• AXXELVRAIL – Enhanced value rack mount rail kit - 424mm max travel length
• AXX1U2UCMA – Cable Management Arm – (*supported with AXXPRAIL only)
• AXX2POSTBRCKT – 2-post fixed mount bracket kit (not supported with 12 and 24 drive storage
SKUs)
Refe
r to the Technical Product Specification for each Intel
®
Server System product family for more
information.