5
2.3. RS-232 Serial Boards (9000 Series)
PenMount 9000 control boards use the RS-232 serial interface. There are currently two
models in the 9000 Series. The general procedure for board installation is similar,
though hardware connection and configuration varies for each board.
2.3.1. PenMount 9036CH
PenMount 9036CH control board is a RS-232 interface touch screen control
board that supports 4,8-wire or 5-wire touch screens. The size of the board
is 60 (L) x 26 (W) x 8.3 (H) mm and it has two connectors and four
dipswitches on-board. Follow the steps below to install 9036CH control
board.
Cut off the power of your computer and display, and then open the case of
the display or the system. Find the space on your system and attach the
control board to your system with screws. The control board has 3φ screw
holes in industrial standard.
PenMount 9036CH Touch screen Control Board Upside
PenMount 9036 Control Board Mechanical Diagram
To Next Page
Loading...
