PenMount Touch screen 9000 - PenMount Monitor and Rotating Functions (Windows NT)

Install Drivers for 9000 Boards
35
Hide Cursor
Set to hide or show cursor.
Cursor Offset
Adjust the cursor offset. See
Setting of the PenMount Control Panel on page
33.
Beep Sound
Turn on or of the beep.
Exit
Exits PenMount Monitor function.
3.5.2.3. PenMount Rotating Functions
PenMount Windows NT Driver supports several display rotating
software packages. Please see Chapter 4. Driver Software
Functions on page 51 for more information. PenMount drivers for
Windows 95, Windows 98/ME as well as Windows
2000/XP/2003/VISTA/7/8 support the following display rotating
software packages:
- Portrait’s Pivot Screen Rotation Software
- ATI Display Driver Rotate Function
- nVidia Display Driver Rotate Function
- SMI Display Driver Rotate Function
- Intel Display Driver Rotate Function
Configure Rotate Function
- Install the rotation software package.
- Choose rotate function (0°, 90°, 180°, 270°) in the 3rd party
software. The calibration screen appears automatically.
Touch this point and rotation is mapped.
NOTE: Rotate function will be disable if you use Monitor
Mapping.
3.5.3. Uninstall PenMount Windows NT Driver
- Exit PenMount Monitor (PM) in the notification area.
- From ‘PenMount Utilities’ in ‘Programs’, select the ‘Uninstall’ utility.
- This message appears: “Are you sure you want to completely remove
‘PenMount Utilities’ and all its components?”
- Select ‘PenMount Windows NT Driver’ and click Remove.