51
Chapter 4. Driver Software Functions
This chapter will guide you to the special software functions that configure and adjust PenMount
control boards and touch screen hardware. Please note that not all of the functions are available for
every driver. See the following table for drivers’ software functions and their availability for specific
interface and systems.
Software Function DOS Win 3.1 95 98/ME NT 2000/XP
/2003/
VISTA/7/
8
CE Linux QNX
Standard Calibration ● ● ● ● ● ● ● ● ● ●
Advanced Calibration ● ● ● ● ● ●
Multiple Monitors ● ●
Multi Device ● ●
Rotation ● ● ● ● ●
Operation Mode ● ● ●
Drawing mode ● ● ● ● ● ● ● ●
Beep Sound ● ● ● ● ● ● ● ● ●
Beep sound adjustable ● ● ●
Wake up function ● ● ●
Showing linearity ● ● ●
Right button ● ● ● ● ● ● ● ● ●
Hide cursor ● ● ● ●
Double click area and
speed adjustable
● ● ● ●
About ● ● ● ● ● ●
Edge Compenstation ● ●
Refresh ● ●
Remark:
With PenMount Windows Universal V2.2.0.283 and the versions later, since the touch screen is installed
as a digitizer device in Windows Vista/7/8 automatically, the functions which are built in Windows Vista / 7/
8, such as rotation, multi-monitors, flicks, and context menu function (which launches a context menu by
long-pressing on touch screen rather than clicking the right-mouse button or pressing the application key
on the keyboard will be supported.
The following content in this chapter deals mainly with PenMount Windows Universal Driver (for
2000/XP/2003/VISTA/7/8). When you click PenMount icon in the notification area and select
“Control Panel” from the menu, “PenMount Control Panel” with the four tags “Device”,
“Multiple-Monitors”, “Tools”, “About” will appear as the screenshot below:
To Next Page
Loading...
