PenMount Touch screen 9000 - Install Penmount Linux X Window RS-232 Driver

Install Drivers for 9000 Boards
49
3.7. Install PenMount Linux X Window RS-232 Driver
Before installing PenMount Linux X Window RS-232 Driver, you must have Linux X
Window installed and running on your computer. You must also have PenMount Serial
Interface either 9026BH or 9036CH control boards installed.
PenMount Linux X Window RS-232 Driver supports the following operating systems:
RS232
Ubuntu 6.06/ 6.10/ 7.04/ 7.10/ 8.04/ 8.10/ 9.04/ 9.10/
10.04/ 10.10/ 11.04/ 11.10/12.04 32_64bit
●
Debian 4.0/ 5.0 32_64bit/ 6.0 ●
Debian 3.1
Fedora 4/5/6/7/89/10/11/12/13 /14/15/16/17 32_64bit ●
Fedora Core4_64bit
Fedora Core3 ●
Fedora Core2 ●
Slackware12.0/12.1 ●
Slackware10.0
Red Hat 9.0 ●
Red Hat 7.3/8.0 ●
OpenSuse 10.1/ 10.2/ 10.3/ 11/ 11.1/ 11.2/ 11.3/ 11.4/
12.1 32_64bit
●
Suse 10.0 ●
Suse 9.2/9.3
Suse 8.0/9.0/9.1
Cent OS 5.2/ 5.3/ 5.4/ 5.5/ 6.0/ 6.2 32_64bit ●
Linux XFree86 4.x.x
Linux XFree86 3.3.6
Linux For GPM ●
QNX 6.4.1/ 6.5 ●
QNX 6.3.2
QNX 6.2 ●
Android ●
3.7.1. Install PenMount Linux X Window RS-232 Driver
Please see the readme file included in the driver folder.