Driver Software Functions
60
4.8. Beep Sound
All of PenMount’s drivers support the beep sound function; however, some PC systems
may only offer a fixed buzzer sound.
4.9. Beep Sound Adjustable
Software drivers for Windows systems let the user adjust the frequency and length of the
beep sound. The drivers let the user adjust the desired touch screen sound, as well as
turn the sound off.
4.10. Wake Up Function
Wake Up function lets the user touch the screen and wake the system up from ‘suspend’
mode.
4.11. Plot Calibration Data
Plot Calibration Data function displays the touch screen linearity map, which is available
if the PenMount driver provides an Advance Calibration function. Touch panel’s linearity
decreases with panel’s age. This non-linearity is apparent when the touched point on the
touch screen is not the same as the point on the display. Plot Calibration Data function
shows the linearity status of the touch screen. This is only a support function for the user.
The exact linearity of a touch screen requires a linearity test machine.
4.12. Right Button
Right Button function simulates the right button function of a mouse. Click the right
button and the user can only touch the screen once and the driver changes the touch
definition to the left button.
4.13. Hide Cursor
Hide Cursor function keeps the cursor arrow and other cursor symbols from appearing
when using the touch screen. The cursor appears when user turns this function off.
4.14. Cursor Offset
Cursor Offset function lets the user adjust the position of the touch point to a desired
location away from the real touch point.
4.15. Double Click Area and Speed
Double Click Area and Speed function lets the user adjust the double click area and
speed to their personal preference.
4.16. About
This option shows the exact version of the drivers and controller firmware. Updated
drivers are available for downloading on the PenMount website at
http://www.penmount.com/ .
To Next Page
Loading...