Install Drivers for 9000 Boards
33
Initialize
This button re-establishes connection with the control
board if the RS-232 serial port becomes disconnected.
Calibration
This button maps the touch panel to the display. Click
Calibration and touch the five points in sequence to
calibrate.
Setting
This item allows setting the mouse
and other interface functions.
Misc. Option
Sets the Right Click Button and Beep Sound
Cursor
Sets Hide Cursor or Cursor Offset. Press the
four triangles with a stylus to adjust cursor offset.
Double Click
Adjusts and tests double click area and speed.
Double click in the test area and the tumbler
swings back and forth.
Draw & Statistics
To test or demonstrate PenMount touch screen operations. The
display also shows touch location. Click Draw & Statistics to start.
To Next Page
Loading...
