EasyManua.ls Logo

Pentair Fleck 5800 LXT - Filter Cycle (3-Cycles Operation)

Pentair Fleck 5800 LXT
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installer manual Fleck 5800 LXT - Description
Ref. MKT-IM-005 / F - 30.04.2020 23 / 96
3.5.3 Filter cycle (3-cycles operation)
Service — normal use
Untreated water is directed down through the filter media and up through the riser tube. The
impurities are retained by the media. The water is filtered as it passes through the media.
Backwash — cycleC1
The flow of water is reversed by the valve and directed down through the riser tube and up
through the filter media. During the backwash cycle, the filter bed is expanded and debris is
flushed to the drain, while the media bed is remixed.
Rapid rinse — cycleC2
The valve directs water down through the filter media and up through the riser tube to the drain.
The media bed is getting re-compacted.
Info
For illustration purpose only. Always verify inlet and outlet marking on the valve.

Table of Contents

Other manuals for Pentair Fleck 5800 LXT

Related product manuals