Pentair Fleck 5800 LXT - Salt Amount Definition; Injector Flow Rates; 1650 Injectors

Installer manual Fleck 5800 LXT - System sizing
34 / 96 Ref. MKT-IM-005 / F - 30.04.2020
4.3 Salt amount definition
The salt settings are controlled through the controller programming. See Resin exchange capacity
and capacity of the unit [
→
Page29].
4.4 Injector flow rates
The following graphics represent the injectors flow rate as a function of the inlet pressure for the
different injector sizes.
4.4.1 1650 injectors
INJECTOR 000
Total
Rinse
Draw
Flow rate [l/min]
Inlet pressure [bar]
INJECTOR 00
Total
Rinse
Draw
Flow rate [l/min]
Inlet pressure [bar]