23 / 84
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H5818602/16
Fig. 2.18 Circuit 1 disabled
At the Main status display with Circuit #1 disabled:
• On the Main menu window, any Disabled Circuit is grayed out as above.
2.2 SETTING UP ADDITIONAL CIRCUITS
Follow Steps 4 through 10 above to set-up each additional Circuit.
2.3 CIRCUITS 14 SETUP COMPLETE CONFIRMATION
After completing the Setup for Circuits 1, 2, 3, and 4, and Circuits are Enabled, go to the Main
window to confirm all Circuits are activated and working properly.
Fig. 2.19 Main status window for confirmation
To Next Page
Loading...
