Pentair raychem ngc-30/uit2 - Status | Min; Max Window

51 / 84
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H5818602/16
3.3.21 STATUS | MIN / MAX WINDOW
This window displays an historical record of minimum and maximum values recorded since the
last Reset time. Data in this status window is “read-only” information. Pressing reset releases all
values and starts another period of accumulation for minimum or maximum values.
Fig. 3.31 Status |Min/Max window
The Status|Min/Max window provides the following controls:
• Min Control Temp Field - The lowest measured temperature used for control reported by any
RTD associated with the Circuit since the last Reset time.
• Max Control Temp Field - The highest monitored temperature used for control reported by any
RTD associated with the Circuit since the last Reset time.
• Min Monitor Temp Field - The lowest temperature measured used for monitoring purposes
reported by any RTD associated with the Circuit since the last Reset time.
• Max Monitor Temp Field - The highest temperature measured used for monitoring purposes
reported by any RTD associated with the Circuit since the last Reset time.
• Max Voltage Field - The highest voltage recorded for the circuit since last Reset.
• Min Voltage Field -The lowest voltage recorded for the circuit since last Reset.
• Max GF Current Field - The highest ground-fault value recorded for the Circuit since the last
Reset time.
• Reset Button -Immediately resets all Min/Max values and begins updating Min./Max. fields with
new values.
• Max Current Field - The highest current recorded for the Circuit since the last Reset.