Pentair raychem ngc-30/uit2 - Status | Rtds Window; Status | PASC Window; Industrial Heat Tracing Solutions EN-Raychemngc30 Uit2 Programming-AR-H58186 02;16 2

46 / 84
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H5818602/16
3.3.16 STATUS | RTDS WINDOW
The Status|RTDs window lists the RTD devices and numbers assigned to the selected Circuit,
along with the last reported temperature from each RTD and the assigned RTD Mode.
Data in this status window cannot be changed.
Fig. 3.22 Status |RTDs window
3.3.17 STATUS | PASC WINDOW
The Status | PASC window displays the current status of Circuit switching PASC algorithm. Data
displayed in this status window cannot be changed.
Fig. 3.23 Status | PASC window
The Status|PASC window provides the following controls:
• On Count Field - The duration (in seconds) an EMR or SSR is on during one on/off cycle.
• Off Count Field - The duration (in seconds) an EMR or SSR is off during one on/off cycle.