Pentair raychem ngc-30/uit2 - Network | Relays Window; Network | Rtds Window

58 / 84
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H5818602/16
3.3.26 NETWORK | RELAYS WINDOW
This status window lists all the available output devices and relay numbers, as well as the relays
that have already been setup.
Fig. 3.36 Network|Relays window
3.3.27 NETWORK | RTDS WINDOW
This window lists all the available RTD addresses. If an RTD has been assigned to a Circuit, the
right side of the window shows where the RTD has been used.
Fig. 3.37 Network |RTDs window