Pentax 555 - Initial Settings; Setting the Display Language

20
1
Getting Started
Initial Settings
If the initial settings screen appears when you turn the camera on, follow the
procedure below to set the display language, Home Town, DST, and current date
and time. If the date and time that appear at the bottom right of the LCD monitor
when you turn the camera on for the first time is not the current time, follow the
instructions for “Setting the Date and Time” (p.22) to set the correct date and time.
You can choose the language in which the menus, error messages, etc. are
displayed from the following: English, French, German, Spanish, Italian,
Japanese, Chinese and Russian.
1 Turn the camera on.
2 Use the four-way controller (45) to
select the display language.
The default setting is English.
3 Press the four-way controller (3).
The screen for setting the city will be displayed.
Setting the Display Language
You can change the setting after it has been made. Refer to “Changing the
Display Language” (p.119).
Power switch
Viewfinder
Four-way controller
OK button
Display button
Menu button
Language/
Initial settings
NYC
English
City
DST
MENU
OK
OK
Exit