Pentax 555 - Automatically Changing the Shooting Conditions (Auto Bracket)

84
Taking Pictures
4
a b c A d G D E
You can take pictures automatically with three different exposure, white balance,
sharpness, saturation and contrast settings.
1 Press the Menu / Fn button in Capture mode.
The [A Rec. Mode] menu will be displayed.
2 Press the four-way controller (3) to select
[Auto Bracket].
3 Press the four-way controller (5).
[Applied Photo] screen to select the bracket setting will be displayed.
4 Use the four-way controller (45) to
select the conditions for bracket
shooting.
If you selected [Sharpness], [Saturation] or
[Contrast], skip to step 7.
5 Press the four-way controller (3) to
select [Exp. Bracket] or [White
Balance].
Go to [Bracket Amount].
6 Use the four-way controller (45) to set
the bracketing steps.
Automatically Changing the Shooting Conditions (Auto
bracket)
1
8
2, 3, 4, 5, 6
7
Rec. Mode
Wide
AWB
Auto
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
1/3
MENU
OK
OK
2592 1944
Recorded Pixels
Auto Bracket
Applied Photo
Bracket Amount
± 0.3
Exp.Bracket
MENU
OK
OK
Exit
Auto Bracket
Applied Photo
Bracket Amount
± 0.3
Exp.Bracket
MENU
OK
OK
Exit