Pentax 555 - Setting the Light Metering Range to Determine the Exposure (AE Metering)

48
Taking Pictures
4
E a b c A d F G D
You can choose which part of the screen to use to measure the brightness and
determine the exposure.
1 Select [AE Metering] on the [A Rec.Mode] menu.
2 Use the four-way controller (45) to
change the metering mode.
3 Press the OK button.
The camera is ready to take the picture.
Setting the Light Metering Range to Determine the
Exposure (AE Metering)
L Multi segment The exposure is determined by the entire screen.
M Center-weighted
The exposure is determined mainly by the center of the
screen.
N Spot
The exposure is determined by the small area in the
center of the screen only.
Saving the AE Metering Method 1 p.87
2
3
1
Rec. Mode
Wide
AWB
Auto
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
1/3
MENU
OK
OK
2592 1944
Recorded Pixels
Rec. Mode
Wide
AWB
Auto
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
1/3
MENU
OK
OK
2592 1944
Recorded Pixels