46
Taking Pictures
4
1 Select [J] on the White Balance screen.
2 Use the four-way controller (45) to
choose “W”, “N” or “D”.
3 Press the OK button twice.
The camera is ready to take the picture.
1 Select [K] (manual) on the white balance screen.
2 Point your camera at a blank sheet of
paper so that it fills the screen.
3 Press the Display button.
The white balance is automatically adjusted,
[Complete] is displayed on the LCD monitor and
the display returns to the menu screen.
4 Press the OK button.
The camera is ready to take the picture.
Selecting the Type of Fluorescent Light J
Manual Setting
AWB
White Balance
D
MENU
OK
OK
Exit
AWB
White Balance
-
D
MENU
OK
OK
Exit
Adjust
DISP
To Next Page
Loading...
