100
3
Taking Pictures
9
Press the 3 button.
The [Interval Shoot] settings are saved and the camera returns to
capture status.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval shooting starts.
The camera turns off between shots (during standby). Press the power
switch during standby to display the remaining number of shots and
interval on the monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval shooting.
Interval shooting is not available in 9, F, X, N or C mode.
The [Interval Shoot] settings can also be configured from the [A
Rec.Mode] menu. (p.133)
e_kb484.book Page 100 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
