81
3
Taking Pictures
1
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame appears (p.78).
When using the flash, press the b button to pop up the flash. (p.112)
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] menu for
using 9 mode (p.140). (The default setting is 9 mode).
•In 9 mode, you cannot change the information on the display by
pressing the W button.
• Press the 3 button in 9 mode to display the [W Setting] menu.
The [A Rec. Mode] menu cannot be displayed.
Shutter release button
Green button
38
38
e_kb484.book Page 81 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
