87
3
Taking Pictures
1
In A mode, set the mode dial to H and press the four-
way controller (3).
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to select C or P and
press the 4 button.
The shooting mode is selected and the
camera returns to capture status.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame appears (p.78).
If the camera recognizes a person’s face in C mode, an orange frame
appears showing the area the camera will zoom in to.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
If the camera recognizes a person's face in C mode, the camera
automatically zooms in to enlarge the area in the orange frame shown
in Step 2.
When using the flash, press the b button to pop up the flash. (p.112)
4
Press the shutter release button fully.
The picture is taken.
Shutter release button
Four-way controller
4 button
14:25
38
38
14:25
04/02/2009
04/02/2009
e_kb484.book Page 87 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
