Pepperl+Fuchs IC-KP2-2HB17-2V1D - Electrical Shock Protection

To Next Page

To Previous Page

2014-02

IC-KP2-2HB17-2V1D

Safety

3.4 Contact protection

Our housings are manufactured using components made partly or completely from metal to

improve noise immunity.

Read head IDENTControl

Compact

Danger!

Electric shock

The metallic housing components are connected to ground to protect against dangerous

voltages that may occur in the event of a fault in the SELV power supply!

See chapter 5.4.3

Main Page

Table of Contents3
Introduction7
Declaration of Conformity8
CE Conformity8
Safety9
Symbols Relevant to Safety9
Intended Use9
General Notes on Safety9
Contact Protection10
Product Description11
Product Family11
R/W Heads11
Read Only Tags/Read/Write Tags11
Handhelds12
Connection Accessories12
Connection Cable for R/W Heads and Trigger Sensors12
Cable Connectors for the Power Supply13
Connection Cable to the Ethernet Interface13
Mounting Aid13
Delivery Package13
Range of Application14
Device Characteristics14
Interfaces and Connections14
Displays and Controls15
Installation16
Unpacking16
EMC Concept16
Installation17
Device Connection17
Power Supply17
Read/Write Head and Trigger Sensors17
Ground Connection18
Ethernet Connection Guide18
Commissioning19
Preliminary Considerations19
Connection19
Device Settings19
Setting the IP Address20
Commands22
Communication of the Identcontrol Compact22
Data Exchange22
Command Execution22
Command Types24
Web Function24
Website of the Identcontrol Compact24
Network Settings25
Email Function26
Sending Commands Via the Website27
Data Logging27
Communication Via TCP/IP28
Data Exchange Via TCP/IP28
Command Examples TCP/IP29
Communication Via MODBUS TCP/IP31
Data Exchange Via MODBUS TCP/IP31
Registers31
MODBUS Commands34
Notes for Creating the Control Program38
MODBUS Exception Codes39
Communication Via Ethernet/Ip40
Data Exchange Via Ethernet/Ip40
Mixed Mode40
Separated Mode41
Data Length41
Assembly Attributes42
Access Administration42
Heartbeat and Ident Status43
Data Hold Time43
Pccc44
Communication Via PROFINET46
What Is PROFINET46
Project Planning Using Device Description (GSD)46
Start-Up: Assignment of Device Name, LED Flashes47
Data Transfer Statistics48
Topology Detection48
Identification & Maintenance Data53
Command Examples54
Command Overview56
System Commands58
Standard Read/Write Commands64
Special Commands for Type IPC03 Tags70
Write Read Only Code" Command for Type IPC11 and IDC80
Extended Command Modes83
Legend93
Fault/Status Messages94
Technical Specifications95
Dimensions95
Technical Data95
Troubleshooting97
ASCII Table98
Example 199
Example 2104
Object Model in the Ethernet/Ip Protocol113
Identity Object (01H)113
Assembly Object (04H)113
Output Command Object (Instances 64H - 6)118
Input Command Object (Instances 65H - 6)119
Boot-Up Parameter Object (Instances 66H - 4)119
Diagnostics Object (Instances 67H - 5)120

Pepperl+Fuchs IC-KP2-2HB17-2V1D - Electrical Shock Protection

Table of Contents

Related product manuals