IC-KP2-2HB17-2V1D
5
7.8 Communication via Ethernet/IP........................................................ 40
7.8.1 Data exchange via EtherNet/IP ........................................................ 40
7.8.2 Mixed mode..................................................................................... 40
7.8.3 Separated mode .............................................................................. 41
7.8.4 Data length....................................................................................... 41
7.8.5 Assembly attributes.......................................................................... 42
7.8.6 Access administration...................................................................... 42
7.8.7 Heartbeat and ident status............................................................... 43
7.8.8 Data hold time.................................................................................. 43
7.8.9 PCCC .............................................................................................. 44
7.9 Communication via PROFINET ......................................................... 46
7.9.1 What is PROFINET?........................................................................ 46
7.9.2 Project planning using device description (GSD)............................. 46
7.9.3 Start-up: Assignment of device name, LED flashes.......................... 47
7.9.4 Data Transfer Statistics..................................................................... 48
7.9.5 Topology detection........................................................................... 48
7.9.6 Identification & Maintenance Data.................................................... 53
7.9.7 Command examples........................................................................ 54
7.10 Command overview ........................................................................... 56
7.11 System Commands............................................................................ 58
7.12 Standard read/write commands ....................................................... 64
7.13 Special commands for type IPC03 tags........................................... 70
7.14 "Write Read Only Code" Command for Type IPC11 and IDC-...-1K
Read/Write Tags80
7.15 Extended Command Modes.............................................................. 83
7.16 Legend ................................................................................................ 93
7.17 Fault/Status messages ...................................................................... 94
8 Technical Specifications .......................................................... 95
8.1 Dimensions......................................................................................... 95
8.2 Technical Data .................................................................................... 95
9 Troubleshooting........................................................................ 97
To Next Page
Loading...