Using your Instrument . 21
The Cancel/Back/Stop key Cancels a selection and returns to the previous
folder, goes Back to previous screen in a method or Stops a measurement.
The OK/Next/Run/Scan key, enters or confirms a selection, moves to the
Next screen or takes a measurement.
Alphanumeric
keys
Use these to enter Method Settings, make Options menu selections and to
write text descriptions, where appropriate. Use repeated presses to cycle
through lower case, number and upper case. Leave for 1 second before
entering the next character.
Use the
key to backspace. Press 1 to enter a space.
To Next Page
Loading...
