82 . Lambda XLS/XLS+ User's Guide
General Maintenance
WARNING
Unauthorized Adjustments and Servicing
Do not attempt to make adjustments, replacements or repairs to this
instrument. There are no user-serviceable parts in this instrument. If
you have any problems, access the Troubleshooting Guide on the
PerkinElmer website and work through the process there:
http://www.perkinelmer.com/LambdaBioXLSSupport
If you do not have access the Troubleshooting Guide, or have any
further problems, contact Customer Care (see Appendix 2: Customer
Care on page 87
for more information).
CAUTION
Before using any cleaning or decontamination methods except those
specified here, users should check with Customer Care that the
proposed method will not damage the instrument.
Cleaning the instrument
External Cleaning
Switch off the instrument and disconnect the power cord before cleaning your instrument.
Clean the outside of the instrument using a damp cloth. A mild liquid detergent may be used,
if necessary. Always test an inconspicuous area of the instrument before you clean the entire
instrument.
Clean all spilled materials from the affected area immediately and wipe it dry with lint-free
paper or cloth.
Removing the cell holder for cleaning
To remove the sample cell holder for cleaning:
1. Loosen the thumbscrews on the sample-holder cover on the base of the instrument by
turning them anticlockwise.
The thumbscrews remain attached to the plate.
To Next Page
Loading...
Need help?
General
