46 . Lambda XLS/XLS+ User's Guide
Spectrum
The Spectrum method enables you to collect an absorption spectrum, and determine peak
heights and positions.
The procedure is as follows:
1. From the home page, press 1 to open the Standard Methods folder.
The Standard Methods screen is displayed.
2. Press 3 to open the Spectrum method.
The Spectrum – Method Settings screen is displayed.
3. Set the Start Wavelength by using the keypad numbers or the left and right arrows,
and then press the down arrow.
4. Set the End Wavelength by using the keypad numbers or the left and right arrows,
and then press the down arrow.
To Next Page
Loading...
