Instrument Methods . 55
Press to display the available Options, which you can select using the keypad
numbers:
1 Method Settings Returns to the Method Settings screen.
2 Print Prints the result using the printer selected in the Utilities
folder.
3 Show Graph Toggles the graph on and off. The wavelength range of the
graph displayed is ±20 nm from the selected wavelength,
which is marked by the cursor.
4 Run Standard Returns to the Run Standard screen.
7 Sample Number Adds a prefix to the sample number and resets the
incrementing number to the desired value.
8 Save Method Use the left and right arrows to select the folder you want to
store the method in (Favorites/Methods 1–9/SD Memory
Card), then press the down arrow and enter a name for the
method. Press Save
to save the method.
9 Auto-Print Toggles Auto-Print on and off.
Press or , or wait 20 seconds to exit the method options.
Press
to return to the Standard Methods folder after all your samples have been
measured.
To Next Page
Loading...
