PerkinElmer Spectrum 100 Series User Manual

Appendices . 111
2. Remove the current sampling accessory by pulling the blue release handle (under
the baseplate of the accessory) towards you and then sliding the accessory towards
you (Figure 51).
Figure 51 Removing the sampling accessory
3. Install the new accessory (Figure 52) by sliding it onto the ledge and pushing it into
the sample compartment until it engages with the connector.
Figure 52 Installing the new sampling accessory
Release
handle

PerkinElmer Spectrum 100 Series Specifications

General

Brand	PerkinElmer
Model	Spectrum 100 Series
Category	Measuring Instruments
Language	English