Using the Spectrometer . 59
5. If Quality Checks have been set, the selected tests are performed as each spectrum
is collected, and a signal light (green
, amber , or red ) is placed in the
QC column to indicate its status.
To examine Quality Check results in more detail, select the appropriate scan then
click the
button.
Working with the Instrument Display and Go button
Figure 12 Instrument Display and Go button
The Display on the lower right of the top of your instrument is used to display prompts
and other messages generated by the Spectrum software.
The messages and prompts provided by the Scan Progress dialog, and the actions of
the Scan/Halt button are mirrored by similar messages and prompts on the Instrument
Display, and the actions of the instrument’s Go button.
When used in conjunction with the Multiple Sample table in the Spectrum software, you
can complete a series of sample scans using the Display and Go button.
Display
Go button
To Next Page
Loading...
Need help?
General
