Table 132
Diagnostic Codes for Low Engine Oil Pressure
J1939
Code
PDL Code
Code Description
(code descriptions may vary)
Comments
100-17
E360 (1) Engine Oil Pressure : Low - least severe (1)
The ECM has been powered for at least 2 seconds.
The engine has been running for at least 10 seconds.
There are no diagnostic trouble codes for the oil pres-
sure sensor.
There are no diagnostic trouble codes for the 5 VDC
supply.
Refer to Illustration 84 for the trip point for the oil
pressure.
100-18
E360 (2) Engine Oil Pressure : Low - moderate severity (2)
The ECM has been powered for at least 2 seconds.
The engine has been running for at least 10 seconds.
There are no diagnostic trouble codes for the oil pres-
sure sensor.
There are no diagnostic trouble codes for the 5 VDC
supply.
The engine will be derated.
Refer to Illustration 85 for the trip point for the oil
pressure.
100-1
E360 (3) Engine Oil Pressure : Low - most severe (3)
The ECM has been powered for at least 2 seconds.
The engine has been running for at least 10 seconds.
There are no diagnostic trouble codes for the oil pres-
sure sensor.
There are no diagnostic trouble codes for the 5 VDC
supply.
The engine will be derated.
Refer to Illustration 86 for the trip point for the oil
pressure.
244 UENR4469-36
Symptom Troubleshooting
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
To Next Page
Loading...
