Illustration 184 g03826905
i06146201
Service Tool Error Identifiers
Service error identifiers are displayed when an
electronic service tool service test has failed. The
error identifiers help to explain the reason for the
service test failure. There could be cases where the
error identifier isolates the failed component. If
applicable, use the appropriate troubleshooting
procedure.
Table 240
Service Error Identifiers
Description Troubleshooting
$0003
Another Service Test is Active
Only one service test may be active on a ma-
chine or engine at a time.
$0004
Service Test Active by Another ECM
Another service test from a different ECM is
active. Either wait until the test is completed
or abort the test to proceed.
$0005
Loss of Service Test Interlock
There is a communication issue between the
ECM and the electronic service tool. There is
too much data communicating across the data
link. Disconnect any other data collecting
tools.
$0006
Service Test Aborted by Tool/Monitor Abort by user. Restart the test if desired.
$101A Incorrect Throttle Position
The throttle is depressed or faulty. If the appli-
cation contains a switched throttle, the switch
may be faulty.
$101B
Shift Lever Not in Neutral Shift the transmission lever to NEUTRAL.
$101C Transmission Gear Incorrect
Shift the power train to NEUTRAL.
(continued)
486 UENR4469-36
Service
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE
To Next Page
Loading...
