Perkins 1204-E44TA - Codes that Inhibit Operation of Aftertreatment System

i07032156
Codes that Inhibit Operation of
Aftertreatment System
Diagnostic Trouble Codes that
Affect the Aftertreatment System
and the Conditions for Clearing the
Code
The following tables list the codes that inhibit the
aftertreatment system either during the current key
cycle or through successive key cycles.
Table 243
Codes That Clear With Each Key Cycle
J1939
Code
PDL
Code
Customer Action Clearing Conditions
102-16 E1044 (2) Cycle key OFF for 2 minutes and then run engine per Clearing
Conditions
Engine Speed >1400/1500 RPM
102-18 E1045 (2) Cycle key OFF for 2 minutes and then run engine per Clearing
Conditions
Engine Speed >1400/1500 RPM
105-3 172-3 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
105-4 172-4 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
110-0 E361 (3) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
110-3 110-3 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
110-4 110-4 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
110-15 E361 (1) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
110-16 E361 (2) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
157-3 1797-3 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
157-4 1797-4 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
157-16 E396 (2) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
157-18 E398 (2) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
168-3 168-3 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
168-4 168-4 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
174-16 E363 (2) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
649-5 3512-5 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
649-6 3512-6 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
649-7 E1263 (2) Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
651-2 1-2 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
651-5 1-5 Cycle key OFF for 2 minutes, then turn key ON Circuit Check (Auto)
(continued)
UENR4469-36 505
Service
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE