EasyManua.ls Logo

Perkins 1204-E44TA - Page 487

Perkins 1204-E44TA
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(Table 240, contd)
Service Error Identifiers
Description Troubleshooting
$1018
Parking Brake Not Engaged Apply the parking brake.
$1109
Left Motor Rotation Direction Incorrect
The left drive motor velocity is greater than 0.
The motor could be faulted or have a loss of
communication on the datalink.
$110A
Right Motor Rotation Direction Incorrect
The right drive motor velocity is greater than
0. The motor could be faulted or have a loss
of communication on the datalink.
$1180 Machine is Not Idle
Implements (or saws in forestry products) are
actively in operation. Hydraulics are not
locked out. Implement lockout solenoid is on
Hoist and is not in float. AWD is installed and
the AWD system is in Creep mode. Steering
lockout is off. OK To Elevate Speed switch is
OFF.
$1126
Ground Speed Too High
The machine is moving. Stop the machine to
perform the service test.
$1012
Lever Not in Correct Position Shift lever to neutral.
$110C
Brake Pedal Depressed
Release the brake.
$115C
Regeneration is Active
Wait for a DPF regeneration to complete or
abort the test.
Wiggle Test
$1011
Engine running Engine speed must be zero.
DPF Soot Loading Sensor Functional Test
$0002
Active Diagnostic Present
Resolve any active diagnostic codes. Refer to
the appropriate troubleshooting procedure.
$1011
Engine Running Engine speed must be zero.
$105F
Test Timed Out Not all conditions were met in
order for the test to complete
Restart DPF Soot Loading Functional test.
$115B
Diesel Particulate Filter soot Loading Sensor
Data incorrect
Contact the Dealer Solutions Network (DSN)
as a soot sensor replacement is
recommended.
Fuel Rail Pressure Relief Valve Test
$0002
Active Diagnostic Present
Resolve any active diagnostic codes. Refer to
the appropriate troubleshooting procedure.
$1161
Fuel Temperature Too High
Fuel temperature must be above the threshold
shown in the service tool and no active high
fuel temperature events .
$10FB
Engine Speed Too Low
Engine speed must be higher than or equal to
low idle speed.
$10FC
Engine Speed Too High
Engine speed must be lower than or equal to
rated speed.
(continued)
UENR4469-36 487
Service
Copyright of Perkins Engine Company Limited. NOT FOR REPRINTING OR RESALE

Table of Contents

Related product manuals