Pfaff 2481-980/30 PLUSLINE - Page 51

Input
11 - 10
● Select second seam section.
● Call up the correction value input menu.
● Place the workpiece on the angle outline on the display and adjust the angle.
The correction value is calculated automatically from the adjusted angle.
● Conclude the input and take over the correction value.
● Switch on the automatic sewing stop at the end of the seam section function.
● Select third seam section.
● Call up the correction value input menu.
● Place the workpiece on the angle outline on the display and adjust the angle.
The correction value is calculated automatically from the adjusted angle.
● Conclude the input and take over the correction value.
● Switch on the automatic sewing stop at the end of the seam section function.
● Select fourth seam section.
● Call up the correction value input menu.
● Place the workpiece on the angle outline on the display and adjust the angle.
The correction value is calculated automatically from the adjusted angle.
● Conclude the input and take over the correction value.
● Switch on the automatic sewing stop at the end of the seam section function.
3
2
135
135
4
135