Setting up
9 - 2
9.02 Inserting the needle in the PFAFF 294 and PFAFF 1294
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Use only system 134 needles.
● Raise the roller presser and swing it out.
● Raise the needle bar as far as possible
and loosen screws 1.
● Insert the needles 2 as far as possible
(the long needle groove of the left needle
must be facing right and that of the right
needle must be facing left).
● Tighten screws 1.
The choice of needle depends on the machine model and the material and thread
being used (see Chapter 3 Specifications).
Fig. 9 - 02
1
2
2