Setting up
9 - 3
9.03 Removing / Inserting the bobbin case
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!
Removing the bobbin case:
● Lift latch
1 and take out bobbin case 2.
Inserting the bobbin case:
● Insert full bobbin case 2 so that you feel
it snap in place.
Fig. 9 - 03
Fig. 9 - 04
9.04 Threading the bobbin thread and regulating the bobbin thread tension
● Thread the bobbin as shown in Fig. 9-04.
● When the thread is pulled, the bobbin
must rotate as shown by the arrow.
● Regulate the bobbin thread tension on
srew 1.
2
1
5 cm
+
-
1