Input
49
11.01.03 Displaying programs and the machine data on the SD memory card
O To call up program management, see chapter 11.01.01 Calling up program
management.
O The SD memory card can be scrolled through within the display by pressing "+" on the
right +/- keys.
O Programs (1 - 99) and machine data (MD) are displayed. Only occupied program places
and saved machine data are displayed.
O Further menu items of program management are called up by pressing the left +/- keys.
O Press the left +/- keys until the corresponding menu item is displayed.
O Confirm selection of the menu item by pressing the right plus key.
DIR
DIR
1 2 40 42 END
To Next Page
Loading...
